You are here: Documents for Review > International
International Hydrogen and Fuel Cell Codes & Standards Documents
January 2008


International Standard for Hydrogen and Hydrogen/Methane Blends Proposed

The Secretariat of ISO/TC 22/SC 25 has issued a New Work Item proposal on Road vehicles—Compressed gaseous hydrogen (CGH2) and hydrogen/methane blends fuel system components.

This NWIP is comprised of the following parts:

  • Part 1:General requirements and definitions
  • Part 2:Performance and general test methods
  • Part 3: Pressure regulator

In keeping with the ISO/TC 22 and TC 197 agreement, the NWIP is to be approved by both technical committees and, if approved, the work is to be undertaken in a joint working group structure.

All U.S. TAG members are asked to complete the response form no later than March 7, 2008 and e-mail it to Debbie Angerman, US TAG Administrator. NHA members are asked to notify Karen Hall of their views for the NHA response to this request by March 4, 2008.

Any NHA members who want a review copy of the New Work Item Proposal may request one from Karen Hall at hallK@hydrogenassociation.org.
February 2007


IEC TC105 – Fuel Cell Technologies

  • Micro Fuel Cells-Safety
  • Stationary Fuel Cells-Safety
  • Single Cell Test Method
January 2007

ISO/FDIS 16110-1, Hydrogen generators using fuel processing technologies—Part 1: Safety. This is a product of ISO TC 197 WG9. Submit votes on this final draft international standard no later than February 2, 2007.
November 2006

DTS 14687-2, Hydrogen fuel – Product specification – Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles is out for vote and comment until the end of November 2006.
ISO 14687:1999, Corrigendum 2, Hydrogen fuel – Product specification is out for review and comment until the end of November 2006.

Systematic review of ISO 14687: 1999, Corrigendum 1: 2001, Hydrogen fuel – Product specification is out for review until February 2007.

IEC/CDV 62282-6-2 Fuel cell technologies Part 6-2: Micro fuel cell power systems – Performance is out for review by TC 197 on its hydrogen safety aspects until mid-December 2006.

IEC/CDV 62282-3-3 Fuel cell technologies – Part 3-3: Stationary Fuel cell power systems – Installation is out for review by TC 197 on its hydrogen safety aspects until mid-December 2006.
Portable Fuel Cells - Reviews due to USTAG by 1/12/07; reviews due to National Committees 1/19/07.

Micro fuel cells: Interchangability - Reviews due to USTAG by 1/12/07; reviews due to National Committees 1/19/07.
August 2006

ISO 16110-2 CD: Hydrogen generators using fuel processing technologies - Part 2: Test methods for performance

ISO 16110-2 was prepared by Technical Committee ISO/TC 197, Hydrogen technologies. It is based in part on IEC 62282-3-2 Fuel cell technologies - Part 3-2 : Stationary fuel cell power systems - Performance test methods and uses a similar approach for measuring the performance of hydrogen generators using fuel processing technologies.

NHA Members who would like to review this draft and provide input for consideration of the NHA comments on this document should contact Karen Hall at hallk@hydrogenassociation.org. Comments are requested by 06 September.
June 2006

ISO/FDIS 13985, Liquid hydrogen—Land vehicle fuel tanks (U.S. TAG votes due July 5)


ISO/DIS 15869.2, Gaseous hydrogen and hydrogen blends—Land vehicle fuel tanks
This ballot period has been extended until November 1, 2006. Please e-mail your comments to dangerman@cganet.com by 8/30/06. This is a joint vote with ISO/TC 58/SC 3 and ISO/TC 22.



ICC 2006/2007 Code Development Cycle - Proposed Code Changes
The ICC code changes are available online (about a month ahead of the print version of the monograph) at:
http://www.iccsafe.org/cs/codes/200607cycle/ProposedChanges/

January 2006

ISO FDIS 17268 Compressed hydrogen surface vehicle refuelling connection devices document has been circulated for voting. You should be receiving a notification about this from your respective country's member body soon (CGA in the United States).


The second committee draft (CD) of ISO 16111 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride - is being circulated for approval among the P-members of ISO/TC 197. P-members are requested to forward their ballot paper to the ISO/TC 197 Secretariat no later than 20 March 2006. Members of the US TAG must send their ballots to Debbie Angerman at CGA no later than February 24.


IEC 62282-3-3 Ed.1: Fuel cell technologies - Part 3-3 Stationary fuel cell power plants - Installation. Members of ISO TC 197 are to review hydrogen safety aspects only. Other critical comments can be passed on to Kelvin Hecht, USTAG Chair for IEC TC 105 - due February 1, 2006.


ISO TC 197 WG13 is meeting on January 23 & 24 in Tokyo to discuss
working draft ISO/WD 26142 - Hydrogen Detectors.


ISO 13984, Liquid Hydrogen - Land vehicle fuelling system interface, is undergoing systematic review. ISO TC 197 P-Members are asked to vote to withdraw, revise/amend, confirm, or confirm with correction of errors. Country ballots are due to the TC 197 Secretariat by March 27, 2006.

December 2005

ISO/DIS 22734-1, Hydrogen generators using water electrolysis process--Part 1: Industrial and commercial applications.

Mail Karen Hall, National Hydrogen Association, for a copy of this document: hallK@HydrogenAssociation.org.
Comments requested by 19 December 2005. NOTE: this is the last day to get comments to Debbie Angerman at CGA.
A New Work Item on hydrogen Detectors
This item is brand new. The Japanese member has created a first draft.

Mail Karen Hall, National Hydrogen Association, for a copy of this document: hallK@HydrogenAssociation.org.
Comments requested by 8 January 2006.


Final Draft International Standard IEC/FDIS 62282-3-2: Fuel cell technologies — Part 3-2: Stationary Fuel Cell Power Plants — Performance test methods (NHA to review hydrogen safety aspects only. Other critical comments can be passed on to Kelvin Hecht, USTAG Chair for IEC TC 105)

Mail Karen Hall, National Hydrogen Association, for a copy of this document: hallK@HydrogenAssociation.org.
Comments requested by 15 January 2006.

IEC 62282-3-3 Ed.1: Fuel cell technologies - Part 3-3 Stationary fuel cell power plants – Installation (NHA to review hydrogen safety aspects only. Other critical comments can be passed on to Kelvin Hecht, USTAG Chair for IEC TC 105)

Mail Karen Hall, National Hydrogen Association, for a copy of this document: hallK@HydrogenAssociation.org.
Comments requested by 1 February 2006.

August 2005


International Electrotechnical Commission
Technical Committee No. 105 -Fuel Cell Technologies
Working Group #3

Stationary Fuel Cell Power plants – Safety

Scope
International standard providing minimum design, construction, operating and quality requirements for stationary fuel cell power plants.