National Hydrogen and Fuel Cell Codes
& Standards Documents
|
| November 2006 |
ASTM International
Committee C28 Advanced Ceramics
Subcommittee C28.04 Applications -
C28.04.05 Fuel Cells
|
| June
2006 |
ICC
2006/2007 Code Development Cycle - Proposed Code Changes
The ICC code changes
are available online (about a month ahead of the print version of the monograph)
at:
http://www.iccsafe.org/cs/codes/200607cycle/ProposedChanges/
California Hydrogen Fuel Standard (69Kb PDF)
|
| May
2006 |
NGV2
Document in Review and Comment Stage
Industry has an opportunity to review
and comment on proposed revisions dated May 2006, and labeled "For Review
and Comment Only," to American
National Standard for Pressure Compressed Natural Gas Vehicle (NGV) Fuel Containers,
NGV2.
NFPA 52
The
NFPA Vehicular Alternative Fuel (VAF) Technical Committee (TC) met at Sandia National
Laboratories in Livermore, California on May 9th & 10th. This was the Report
on Proposals planning meeting for the current revision cycle of NFPA
52.
|
| December
2005 |
On December 2, the California Air Resources Board distributed "Draft
siting and location criteria" for the three hydrogen demonstration fueling
stations that will be co-funded by CA Senate Bill 76. These criteria are available
for review and comment until January 5, 2006.
· DRAFT
Location and Siting Criteria for Hydrogen Fueling Stations (18Kb PDF)
· Full memo from Robert
H. Cross, Chief, Mobile Source Control Division (17Kb PDF)
|
| August
2005 |
National
Fire Protection Association
NFPA 853
Standard for the Installation of Stationary Fuel Cell Power Plants - 2003 Edition
Scope
The 2003 Edition has been expanded to include stationary
fuel cells below 50kW. The new chapter, “Fuel Cell Power Systems 50 kW or
Less” gives requirements for both outdoor and indoor installations as well
as ventilation and fire protection for these smaller systems.
National Institute of Standards and Technology (NIST)
Weights and Measures
Division
Hydrogen
Gas Meter Code
Scope
For use as the basis for a standard
to be adopted by US Weight and Measure jurisdictions for regulating hydrogen refueling
equipment at commercial service stations and for fleet operations.
ISO/DIS 22734-1, Hydrogen generators using water electrolysis process--Part
1: Industrial and commercial applications.
ISO/DIS
22734-1 (292Kb PDF)
Explanatory
Report (80Kb PDF)
Comments
Template (42Kb MS Word)
This draft is a product of WG-9. Your vote
is requested by October 11 to allow time for us to discuss the vote and comments
at the Oct. 27 U.S. TAG meeting and come to a consensus response before the
close of voting December 29. The history of this document may be found on the
ISO/TC 197 website under work item 04-117.
ISO TC 197 US TAG members,
please submit comments to Debbie Angerman at dAngerman@cganet.com.
All others should submit comments to Karen Hall at hallk@hydrogenassociation.org.
Permission is granted by the American National Standards Institute to
electronically reproduce this draft International Standard for the
purpose
of review and comment related to the preparation of the U.S. position, provided
this notice is included. All other rights are
reserved.
|
| July
2005 |
Input
for Minutes of the July 2005 Meeting of the DOE Hydrogen and Fuel Cells Codes
& Standards Coordinating Committee/US TAG Teams (121Kb PDF)
Kelvin
Hecht
|
